SkyDrill
ACS area B

Aircraft Drawings

15 practice questions for the Aviation Mechanic General (AMG) test. Open any question for the answer, an explanation of every choice, background, and the source citation. To answer them in a quiz, use the practice mode and pick this area.

  1. 1.Checking a measured part against a plus-or-minus toleranceAM.I.B.K3
  2. 2.Meaning of a fuselage station numberAM.I.B.K3
  3. 3.Reference for vertical locationsAM.I.B.K3
  4. 4.Print tolerance when none is shown on a dimensionAM.I.B.K2
  5. 5.Reading a limit dimensionAM.I.B.K2
  6. 6.Centerline dash patternAM.I.B.K1
  7. 7.Meaning of phantom linesAM.I.B.K1
  8. 8.Purpose of a leader lineAM.I.B.K1
  9. 9.Definition of toleranceAM.I.B.K3
  10. 10.Computing tolerance from unequal allowancesAM.I.B.K3
  11. 11.Primary purpose of an assembly drawingAM.I.B.R1
  12. 12.Completeness of a repair sketchAM.I.B.R1
  13. 13.Location of application informationAM.I.B.R2
  14. 14.Checking model and change letter when opening a drawingAM.I.B.R3
  15. 15.Contents of a revision blockAM.I.B.R3