SkyDrill
ACS area G

Cleaning and Corrosion Control

25 practice questions for the Aviation Mechanic General (AMG) test. Open any question for the answer, an explanation of every choice, background, and the source citation. To answer them in a quiz, use the practice mode and pick this area.

  1. 1.Dry wash exterior cleaning methodAM.I.G.K1
  2. 2.Conditions required for electrochemical corrosionAM.I.G.K2
  3. 3.Galvanic corrosion rate and relative surface areaAM.I.G.K3
  4. 4.Inspecting flap and spoiler recessesAM.I.G.K4
  5. 5.Cleaning interval change between corrosion severity zonesAM.I.G.K5
  6. 6.Neutralizing steel parts after picklingAM.I.G.K17
  7. 7.Residual treatment salts under paintAM.I.G.K19
  8. 8.Inspecting painted surfaces for hidden corrosionAM.I.G.K21
  9. 9.Fire extinguisher rating for cabin cleaning operationsAM.I.G.K22
  10. 10.Flammable vapor limit during cabin cleaningAM.I.G.R1
  11. 11.Choosing a cleaner for unpainted aluminumAM.I.G.K11
  12. 12.Insulating a magnesium joint at high service temperatureAM.I.G.K12
  13. 13.Alodizing as a replacement for anodizingAM.I.G.K13
  14. 14.Alclad protective layerAM.I.G.K14
  15. 15.Preferred primer for dissimilar metal jointsAM.I.G.K15
  16. 16.Smoking rivet identificationAM.I.G.K6
  17. 17.Blend-out length for a corrosion pitAM.I.G.K7
  18. 18.Effect of a partially applied preservativeAM.I.G.K8
  19. 19.Preservatives on main landing gear wheelsAM.I.G.K9
  20. 20.High-pressure water in the wet wash methodAM.I.G.K10
  21. 21.Metal polish on anodized aluminumAM.I.G.R2
  22. 22.Chemical corrosion removers on highly stressed steelAM.I.G.R3
  23. 23.Class I low flash point solventsAM.I.G.R4
  24. 24.Rinsing cloths used with chromate treatmentsAM.I.G.R5
  25. 25.Protective equipment for paint stripperAM.I.G.R6