SkyDrill
ACS area J

Reciprocating Engine Induction and Cooling Systems

13 practice questions for the Aviation Mechanic Powerplant (AMP) test. Open any question for the answer, an explanation of every choice, background, and the source citation. To answer them in a quiz, use the practice mode and pick this area.

  1. 1.Cowl flap position during ground operationAM.III.J.R1
  2. 2.Rags and paper left in induction intakesAM.III.J.R2
  3. 3.Coolant additives as a source of chromium in oilAM.III.J.R3
  4. 4.Fuel introduction point on a fuel-injected engineAM.III.J.K1
  5. 5.Cause of throttle ice at part throttleAM.III.J.K2
  6. 6.Classifying a 40 inches Hg turbosupercharged engineAM.III.J.K3
  7. 7.Compressor discharge air temperature and the aftercoolerAM.III.J.K4
  8. 8.How an augmentor draws cooling airAM.III.J.K5
  9. 9.Spring-loaded induction filter door actionAM.III.J.K6
  10. 10.Carburetor heat during engine startAM.III.J.K7
  11. 11.Share of ram airflow entering the cowlingAM.III.J.K8
  12. 12.Purpose of the cowl panel engine air sealAM.III.J.K9
  13. 13.Where coolant absorbs heat in a liquid-cooled engineAM.III.J.K10