Permission for a restricted area in Class G

Remote Pilot (Part 107) practice question 18 of 31 on Airspace / Operational Requirements. ACS element UA.II.B.K2 · difficulty: applied. Want to answer it in a timed quiz? Use the Remote Pilot (Part 107) practice mode.

Question bank updated 2026-09-22

QUESTIONA remote pilot wants to fly inside a charted restricted area whose airspace is otherwise Class G. Whose permission does part 107 require before the flight?

  1. ANo one, because Class G airspace never requires an authorization to operate
  2. BThe using or controlling agency of the restricted area
  3. CThe nearest Air Traffic Control facility, under the § 107.41 authorization process
Show the answer and explanation

Correct answer: B. The using or controlling agency of the restricted area

  • A — incorrect Class G alone needs no ATC authorization, but the restricted area is a separate special use airspace restriction covered by § 107.45.
  • B — correct § 107.45 prohibits operation in prohibited or restricted areas unless the person has permission from the using or controlling agency, as appropriate; the Class G status does not remove that requirement.
  • C — incorrect § 107.41 covers Class B, C, D, and surface-area Class E. Restricted areas are handled by § 107.45, which points to the using or controlling agency, not ATC.

BACKGROUND

Restricted areas are special use airspace where flight is not wholly prohibited but is subject to restrictions because of unusual, often invisible hazards such as artillery firing, aerial gunnery, or guided missiles. The Remote Pilot Study Guide warns that penetration of a restricted area without authorization from the using or controlling agency may be extremely hazardous. Section 107.45 codifies this for small unmanned aircraft: no person may operate in prohibited or restricted areas unless that person has permission from the using or controlling agency, as appropriate. This requirement is independent of the airspace class; a remote pilot in Class G still needs no Air Traffic Control (ATC) authorization under § 107.41, but does need agency permission for the restricted area.

STUDY TIP

Keep the two rules separate: § 107.41 is about airspace class and ATC, while § 107.45 is about prohibited and restricted areas and the using or controlling agency.

KEY POINTS

  • § 107.45 requires permission from the using or controlling agency for prohibited or restricted areas.
  • Restricted areas contain hazards such as artillery firing, aerial gunnery, or guided missiles.
  • Airspace class and special use airspace are evaluated separately.

SOURCES

  • 14 CFR 107.45
  • remote_pilot_study_guide.txt ch2 "Restricted Areas"
Practice the Remote Pilot (Part 107) test →Timed 60-question exam, by ACS area, or review your misses. Free.
MORE ON AIRSPACE / OPERATIONAL REQUIREMENTS

SkyDrill is not affiliated with the FAA. This is an original practice item based on 14 CFR part 107, 14 CFR part 89, and the FAA Remote Pilot – Small UAS Study Guide (FAA-G-8082-22). Regulations and handbooks are revised; confirm details against the current edition.