SkyDrill

Remote identification compliance label requirements

Remote Pilot (Part 107) practice question 7 of 8 on Regulations / Remote Identification. ACS element UA.I.F.K7 · difficulty: recall. Want to answer it in a timed quiz? Use the Remote Pilot (Part 107) practice mode.

Question bank updated 2026-09-22

QUESTIONUnder 14 CFR part 89, the label indicating that a standard remote identification unmanned aircraft meets the remote identification requirements must be

  1. AIn English and permanently affixed to the aircraft
  2. BIn English and carried as a separate document with the aircraft registration
  3. CIn the language of the country of manufacture and removable for inspection
Show the answer and explanation

Correct answer: A. In English and permanently affixed to the aircraft

  • A — correct § 89.525(a) requires the label to be in English and to be legible, prominent, and permanently affixed to the unmanned aircraft.
  • B — incorrect § 89.525(a) requires a label permanently affixed to the unmanned aircraft, not a separate document carried with the registration.
  • C — incorrect The regulation specifies that the label must be in English and permanently affixed; a removable label in another language does not meet § 89.525.

BACKGROUND

Subpart F of 14 CFR part 89 covers remote identification design and production. Section 89.525 addresses labeling. Under § 89.525(a), no person may produce a standard remote identification unmanned aircraft under § 89.515 unless it displays a label indicating that the aircraft meets the requirements of part 89, and that label must be in English and be legible, prominent, and permanently affixed to the unmanned aircraft. Section 89.525(b) applies the same rule to a remote identification broadcast module produced under § 89.520: the label must be in English, legible, prominent, and permanently affixed to the module. The label is how a remote pilot can see at a glance that a product was produced to the remote identification standard.

STUDY TIP

Learn the four label attributes as a set: English, legible, prominent, permanently affixed. The same four apply to both standard remote identification aircraft and broadcast modules.

KEY POINTS

  • § 89.525 requires a label showing the product meets the remote identification requirements of part 89.
  • The label must be in English and be legible, prominent, and permanently affixed.
  • The same labeling rule applies to standard remote identification unmanned aircraft and to remote identification broadcast modules.

SOURCES

  • 14 CFR 89.525(a)
  • 14 CFR 89.525(b)
Practice the Remote Pilot (Part 107) test →Timed 60-question exam, by ACS area, or review your misses. Free.
MORE ON REGULATIONS / REMOTE IDENTIFICATION

SkyDrill is not affiliated with the FAA. This is an original practice item based on 14 CFR part 107, 14 CFR part 89, and the FAA Remote Pilot – Small UAS Study Guide (FAA-G-8082-22). Regulations and handbooks are revised; confirm details against the current edition.