SkyDrill
ACS area K

Inspection Concepts and Techniques

20 practice questions for the Aviation Mechanic General (AMG) test. Open any question for the answer, an explanation of every choice, background, and the source citation. To answer them in a quiz, use the practice mode and pick this area.

  1. 1.Location of annual and 100-hour inspection scopeAM.I.K.K4
  2. 2.Who may conduct an annual versus a 100-hour inspectionAM.I.K.K4
  3. 3.Maximum overflight of a 100-hour inspectionAM.I.K.K4
  4. 4.Time limit for a progressive inspection cycleAM.I.K.K4
  5. 5.Applying for a progressive inspection programAM.I.K.K4
  6. 6.100-hour inspection due after discontinuing a progressive programAM.I.K.K4
  7. 7.Altimeter and static system test interval for IFRAM.I.K.K4
  8. 8.Flashlight angle for surface crack inspectionAM.I.K.K5
  9. 9.Most easily detected sign of a hard landingAM.I.K.K5
  10. 10.Hardness tester for fire-damaged steelAM.I.K.K5
  11. 11.Required penetration of a fillet weldAM.I.K.K5
  12. 12.Main disadvantage of penetrant inspectionAM.I.K.K3
  13. 13.Appearance of fluorescent penetrant indicationsAM.I.K.K3
  14. 14.Circular magnetization for axial defectsAM.I.K.K3
  15. 15.Wavelength at the ultrasonic fundamental frequencyAM.I.K.K3
  16. 16.Guarding against frequency drift in resonance testingAM.I.K.R2
  17. 17.Material of an eddy current reference standardAM.I.K.K2
  18. 18.Range and accuracy of dial-type ultrasonic thickness unitsAM.I.K.R1
  19. 19.Choosing penetrant for a nonmagnetic partAM.I.K.R3
  20. 20.Checking composite conductive path with an ohmmeterAM.I.K.R4